ultrasonic cleaning equipment suppliers/manufacturers

Ultrasonic cleaning machine is used to clean holes with higher surface finish and smaller diameter, so the ultrasonic cleaning machine with shorter sound wave and concentrated sound wave energy should be selected. But if you choose high-frequency ultrasonic cleaning machine cleaning, then the ultrasonic vibration in the face of cleaning fluid will be weakened, cavitation intensity, and the distance will be shortened, then the cleaning capacity will be reduced. If you want to choose no frequency ultrasonic cleaning machine cleaning, then according to the frequency you need to adjust the size of the frequency, of course, the output frequency * and the frequency of the transducer, this can be more effective to achieve cleaning effect, and cavitation effect will be enhanced.

Type	Internal size L*W*H (mm)	Frequency (Khz)	Power(W)	Heating(W)
UCE-1006ST	280×210×210	20,28,33,40,80,130	300	1000
UCE-1012ST	400×310×280	20,28,33,40,80,130	600	3000
UCE-1018ST	490×360×320	20,28,33,40,80,130	900	3000
UCE-1024ST	630×430×320	20,28,33,40,80,130	1200	4000
UCE-1030ST	630×530×320	20,28,33,40,80,130	1500	4000
UCE-1036ST	680×530×360	20,28,33,40,80,130	1800	5000
UCE-1040ST	680×570×400	20,28,33,40,80,130	2000	5000
UCE-1041ST	730×570×450	20,28,33,40,80,130	2400	6000
UCE-1042ST	790×670×510	20,28,33,40,80,130	3000	6000
UCE-1043ST	850×770×570	20,28,33,40,80,130	4000	7000
UCE-1044ST	910×820×620	20,28,33,40,80,130	5000	7000
UCE-1045ST	960×870×680	20,28,33,40,80,130	8000	8000
UCE-1046ST	1100×930×730	20,28,33,40,80,130	10000	8000