ultrasonic cleaning system for sale

Ultrasound cleaning can remove some of the dirt which was most difficult to remove in the past, such as some dead corners or dirt in the slit, so as to meet the quality requirements of the follow-up treatment. Ultrasound cleaner manufacturers stress that this method can be a good solution to the relevant equipment welding residual liquid or dirt. Normal methods are difficult to write clearly, but this requirement and purpose can be achieved by using ultrasonic cleaning and rinsing processes. This can be a good way to avoid aging, rusting or yellowing.

 

The results show that ultrasonic cleaning is directly related to rust removal and rinsing effect, and indirectly depends on ultrasonic intensity. Usually the ultrasonic power of unit area reaches a certain level, and water soluble medium will cause cavitation. As long as we try to improve the ultrasound intensity within a certain range, these effects will obviously increase. Therefore, the manufacturer of ultrasonic cleaning mechanism reminds that the power density is usually specified when cleaning. A range is appropriate, but we should also pay attention to adjusting the vibration frequency and temperature.

Type	Internal size L*W*H (mm)	Frequency (Khz)	Power(W)	Heating(W)
UCE-1006ST	280×210×210	20,28,33,40,80,130	300	1000
UCE-1012ST	400×310×280	20,28,33,40,80,130	600	3000
UCE-1018ST	490×360×320	20,28,33,40,80,130	900	3000
UCE-1024ST	630×430×320	20,28,33,40,80,130	1200	4000
UCE-1030ST	630×530×320	20,28,33,40,80,130	1500	4000
UCE-1036ST	680×530×360	20,28,33,40,80,130	1800	5000
UCE-1040ST	680×570×400	20,28,33,40,80,130	2000	5000
UCE-1041ST	730×570×450	20,28,33,40,80,130	2400	6000
UCE-1042ST	790×670×510	20,28,33,40,80,130	3000	6000
UCE-1043ST	850×770×570	20,28,33,40,80,130	4000	7000
UCE-1044ST	910×820×620	20,28,33,40,80,130	5000	7000
UCE-1045ST	960×870×680	20,28,33,40,80,130	8000	8000
UCE-1046ST	1100×930×730	20,28,33,40,80,130	10000	8000