Car/Motor/Truck Wash Rinse Dry Ultrasonic Parts Cleaner Multi Tank

What is the working principle of the multi tank ultrasonic cleaner? Next, I will introduce the main links and steps of its work, the principle and knowledge of how the multi groove ultrasonic cleaner works. The principle of the ultrasonic cleaning machine is to convert the transducer, the sound energy of the power ultrasonic frequency source, into mechanical vibration, and to radiate the cleaning liquid in the tank to the ultrasonic through cleaning the tank wall. Because of the ultrasonic radiation, the microbubbles in the liquid can keep vibration under the action of the acoustic wave.

When the sound pressure or intensity reaches a certain degree, the bubble will expand rapidly, and then suddenly close. In this process, the shock wave is generated at the moment when the bubble is closed, and the pressure and local temperature of 1012-1013pa are generated around the bubble. The huge pressure generated by the ultrasonic cavitation can destroy the insoluble dirt and make them differentiate into solutions. The direct counter impact of the steam cavitation on the dirt.

On the one hand, it can destroy the adsorption of the dirt and the surface of the cleaning part, on the other hand, it can cause the fatigue damage of the dirt layer and be removed. The vibration of the gas bubble will scrub the solid surface. Once the dirt layer has a gap to drill, the bubble will immediately "drill in" and vibrate to make the dirt layer fall off. Due to the cavitation, the two liquids will disperse rapidly at the interface and be emulsified When cleaning the surface of the parts, the oil is emulsified and the solid particles fall off by themselves. When the ultrasound propagates in the cleaning solution, it will produce positive and negative alternating sound pressure, form jet, and impact the cleaning parts. At the same time, due to the nonlinear effect, it will produce sound flow and micro sound flow, while the ultrasonic cavitation will produce high-speed micro jet at the solid and liquid interface. All these effects can destroy the dirt, remove or weaken the boundary The dirty layer can increase the mixing and diffusion effect, accelerate the dissolving of soluble dirt and strengthen the cleaning effect of chemical cleaning agent. It can be seen that any place where the liquid can be immersed and the sound field exists has a cleaning effect, and its characteristics are applicable to the cleaning of parts with very complex surface shape. In particular, the use of this technology can reduce the amount of chemical solvents, thus greatly reducing environmental pollution.

Multi tank ultrasonic cleaning machine is a three tank multi position cleaning machine, which is specially designed for electroplating and painting pretreatment. It can choose any combination of ultrasonic cleaning, rinsing, spraying, drying and other processes. This machine adopts a new generation of water-based environmental protection solution, no erosion, no pollution, better cleaning effect, so as to make electroplated layer and spray paint layer more reliable. The automatic hoisting transmission device can also be configured according to the user's requirements, which is safer, more reliable and faster to clean the station.