Home > NEWS > Automated Multi-Tank Ultrasonic Cleaner > Manufacture Of Razors / Rakes Of Disposable Razors Injection Moulding Plastic Multi-Tank

Manufacture Of Razors / Rakes Of Disposable Razors Injection Moulding Plastic Multi-Tank

2020-02-05 21:44 admin
Manufacture Of Razors / Rakes Of Disposable Razors Injection Moulding Plastic Multi-Tank
The working principle of the multi groove ultrasonic cleaning machine is to use the mechanical vibration with strong ultrasonic penetration force to impact the surface of the workpiece and to clean the workpiece surface with cleaning agent. The working process is to manually put the workpiece to be cleaned into the tooling basket, and then clean it in turn according to the cleaning process. After cleaning, take out the workpiece manually. This equipment is easy to operate. Closed appearance, beautiful and generous modeling structure. High cleaning efficiency, consistent cleaning quality, suitable for mass production.
Electric heating and temperature control: 0-100 degrees adjustable. When the temperature rises to the set temperature, the automatic power-off stops heating.
1. Cleaning basket frame: 304 stainless steel round steel and 304 stainless steel 10 * 10 mm grid welding.
2. Equipment cover: made of stainless steel 1.0mm thick plate, supported by gas spring.
3. Equipment underframe: stainless steel square tube welding, with 4 silent mobile casters at the bottom.
4. Control cabinet: made of stainless steel sheet metal, the upper part is the electrical control part, and the lower part is equipped with ultrasonic generator.
5. Water inlet valve: all equipped with front stainless steel water inlet valve, easy to operate.
6. Drain valve: all three tanks are equipped with 1 "stainless steel valve.
7. It is equipped with an overflow port to prevent overflow of the tank body in the process of adding water.
Manufacture Of Razors / Rakes Of Disposable Razors Injection Moulding Plastic Multi-Tank
Manufacture Of Razors / Rakes Of Disposable Razors Injection Moulding Plastic Multi-Tank

Manufacture Of Razors / Rakes Of Disposable Razors Injection Moulding Plastic Multi-Tank

Original address:https://www.ultra-piezo.com/news/Automated-Multi-Tank-Ultrasonic-Cleaner/Manufacture-Of-Razors---Rakes-Of-Disposable-Razors-Injection-Moulding-Plastic-Multi-Tank.html

author:UCESONIC

TAG ultrasonic: