Plastic Welding with Ultrasonic generator 15khz/20khz

Adopting 32-bit single chip microcomputer control system, all functions are controlled intelligently by computer. Ultrasound output frequency is deviated according to the frequency of the welding joint and the welding product for a long time. The false change of the welding joint frequency after pressing the product is ensured. The equipment works at the most suitable frequency point, so that the welding products are more stable, perfect, reliable and unified.

 

First, advantages: 1. It is easy to avoid manual frequency modulation, automatic frequency detection and easy to use.

 

2. Built-in computer digitization of various parameters, automatic compensation type of amplitude, no-load amplitude is small, when the load is heavier amplitude and power synchronous amplification, so as to effectively protect the transducer and welding die, higher welding accuracy;

 

3. The power output adopts digital stepless linear regulation, and the output power is freely selected from 50%-100%. The internal power amplification adopts full-bridge IGBT module. The ultrasonic conversion rate is high and the maximum ultrasonic power can reach 7200W, which can meet various welding requirements.

 

4. More advanced protection circuit, output sound overload, mold burst suddenly overload, built-in computer detection circuit in a very short time to cut off the output, thereby protecting the internal circuit;

 

5. High speed handover of up to 135 times per minute can be used to weld various non-standard automation equipment.

 

6, the operation interface can be selected in Chinese or English, and foreign purchasing is more convenient.