ultrasonic generator function manual

Mark in the product This power supply case contains the danger of injury caused by voltage, so it is labeled as dangerous. 1.2 note 1.2.1 general considerations. When preparing the power supply case, I have the following ideas. Make sure that the switch is in a closed state before connecting to the power supply. The power box is designed to provide a high voltage power supply. Please do the following preparatory measures before starting the circuit board in the chassis. Turn off the power switch. Pull out the socket on the panel. Wait for the capacitor to discharge for about 2 minutes. There is high voltage current flowing in the power cabinet. Do not open the cabinet cover. When RF wires and rotary sockets are not connected, the machine must not be switched on. 1.3 summary power box has the following functions. Save resonance frequency: save the frequency of the soldering head used in the final welding work. AFC: Explore the resonance frequency acting on the mold. Amplitude control: Externally control DC voltage to control the amplitude between 10% and 100%. Input voltage instability solution: input voltage instability can also keep the amplitude of the transducer unchanged. Steady amplitude increasing device: keep amplitude at welding and maintain output amplitude. Over-negative voltage 2. Over-negative current 3. Error phase (state) 5. Over-output? Soft-start function: 4 kinds of soft-start time optional operation. There are several functions to protect the power chassis. 1.4 features 1.4.1 power chassis power supply consists of ultrasonic power chassis, circuit board and control device. 50/60 H The converter converts high frequency electronic vibrations into equivalent mechanical vibrations. The core material of the converter is piezoelectric ceramics. In this process, more than 90% of the electrical energy is converted into mechanical energy. 3.1 Setup and installation of 3.1.1 Environmental Notes Power chassis is an electronic combination of electrical energy converter to ultrasonic energy. Please pay special attention during transportation. The chassis can not be thrown or unproperly transported or mishandled, and the products will be damaged in most cases. Installation of mechanical energy area should follow the environmental warning on page 1. Peripheral operating temperature preservation/installation temperature humidity temperature + 5 ~50 (+41 +122) 25 ~+70 (-13 +158) 30% - 95% to prevent condensation 3.2 acceptance power box is a vulnerable item. Careless fall or improper use will damage the product. 3.2.1 Inspection Scope This case is strictly inspected and packed before shipment, although it is hoped that acceptance will be carried out in strict accordance with the following acceptance methods. After receiving the goods, please accept the following methods. Stage 1234 check content is consistent with packing list and packaging content. Check whether the package and components are damaged (naked eye). Contact the shipping company immediately if there is any damage. If there is any screw loose during transportation, tighten the screw if there is any. Small accessories check confirm.