Sweep Generator Control Immersible Ultrasonic transducer

Sweep Generator Control Immersible Ultrasonic transducer
Vibrating plate type ultrasonic cleaner is composed of vibration plate and ultrasonic generator. It is suitable for placing in various containers. According to the different location, it can be made into bottom vibration type, side shock type and top shock type. There are three kinds of different cleaning requirements. Using clear water, alkaline or weak acidic water-based solvent as cleaning agent, it is mainly suitable for cleaning of electroplated parts before and after plating, as well as cleaning of clocks and watches, hardware and machinery parts, jewelry, lens and spectacle frames, glassware, semiconductor silicon wafers, etc. Material is imported 316L stainless steel structure, acid and alkali resistance, using Japanese high "Q" value transducer, strong and stable ultrasonic output; Solvent heating and automatic constant temperature device and automatic frequency tracking circuit are set up to make the load change consistent with ultrasonic.

Type	Diamention(mm)	Frequency (Khz)	Power(W)	Ultrasonic Transducer
UCE-UITP300W	300*190*100	25,28,33,40,80,130	300	6
UCE-UITP600W	360*275*100	25,28,33,40,80,130	600	12
UCE-UITP1000W	450*350*100	25,28,33,40,80,130	1000	20
UCE-UITP1200W	470*380*100	25,28,33,40,80,130	1200	24
UCE-UITP1500W	520*450*100	25,28,33,40,80,130	1500	30
UCE-UITP1800W	560*450*100	25,28,33,40,80,130	1800	36
UCE-UITP2000W	650*450*100	25,28,33,40,80,130	2000	40
UCE-UITP2400W	740*520*100	25,28,33,40,80,130	2400	48
UCE-UITP3000W	820*540*100	25,28,33,40,80,130	3000	60
UCE-UITP5000W	1200*590*100	25,28,33,40,80,130	5000	100
OEM Ultrasonic Immersible Transducer Pack（Size, Frequency,Power）