Home > NEWS > Plastic Injection Mold ultrasonic Cleaner > 28khz Injection Mold Life Extended with Ultrasonic Cleaning machine

28khz Injection Mold Life Extended with Ultrasonic Cleaning machine

2020-02-07 18:37 admin
28khz Injection Mold Life Extended with Ultrasonic Cleaning machine
Equipment usage: used for cleaning plastic mold, module, module, mold core, inlay needle, inlay decontamination, high temperature carbon deposition, sulfide, gas, oil and rust removal.
 
Brief introduction of electric control of electrolytic ultrasonic mold cleaning machine
1、 Equipment use: for cleaning precision optical mould, optical guide plate mould, for cleaning oxide, gas, high temperature residue, oil stain and carbon deposit on optical mould.
1. Adopt Mitsubishi PLC and touch screen to control the operation. There are four procedures to control the cleaning process.
2. The cleaning time and process can be set freely on the touch screen; there are three kinds of automatic cleaning process procedures and a variety of manual cleaning procedures.
3. There are fault displays on the control panel, such as low liquid level display, discharge display, water pump over-current display and working display.
4. The cleaning times are recorded, and the acoustic photoelectric alarm device is set.
Type Frequency (Khz) Power(W) Capacity(L)
UCE-30LTT 28KHZ,40KHZ 1500 30
UCE-50LTT 28KHZ,40KHZ 2500 50
UCE-70LTT 28KHZ,40KHZ 3500 70
28khz Injection Mold Life Extended with Ultrasonic Cleaning machine
28khz Injection Mold Life Extended with Ultrasonic Cleaning machine

28khz Injection Mold Life Extended with Ultrasonic Cleaning machine

Original address:http://www.ultra-piezo.com/news/plastic-injection-mold-ultrasonic-cleaner/28khz-Injection-Mold-Life-Extended-with-Ultrasonic-Cleaning-machine.html

author:UCESONIC

TAG ultrasonic: