industry plastic mould ultrasonic cleaning system 40khz

Advantages of mold ultrasonic cleaning machine:

1. The electrolytic cleaning system is to send gas to the metal surface and use the sauna cleaning effect to remove the dirt, impure matters and sundries on the metal surface. It can also completely remove the resin component and moisture; through ultrasonic vibration, the dirt will peel off and float up, and the metal will attach to the cathode, even the dirt in the dead angle can be completely removed.

2. Restore the metal to the original copper green and restore the original beauty of the metal.

3. Even complex shapes can remove dirt.

4. Can achieve the purpose of clean decontamination.

5. It has good effect of rust removal and rust prevention.

6. Generally speaking, it is about an hour less than manual cleaning.

7. It is more environmentally friendly and safer than using organic solvents.

8. Can greatly reduce the bad rate after cleaning.

9. This cleaning machine has a long service life, generally at least five years.

10. The purchase cost and use cost of the whole machine are reasonable.

Electrolytic ultrasonic cleaning process description: Gold mold cleaning → water cleaning → rust prevention project.