ultrasonic atomizing piezoelectric transducer 1.7mhz

In order to achieve the longest service life and the best use effect of your product, please read the following carefully.

_Scale will deposit on the surface of the shell and nebulizer sheet of the nebulizer after long working time, which seriously affects its service life and nebulizer quantity. Therefore, it is recommended that the nebulizer be cleaned at least once every half month. When cleaning, use a soft cloth dipped in alcohol to gently scrub the surface of the atomizer shell and the atomizer sheet. Do not clean the atomizer sheet with a hard object to avoid scratching the atomizer sheet.

_Water quality will affect the service life of atomizer. Clean water is recommended.

_When the atomizer works for a long time (about 5000 hours), the service life of the atomizer will decrease and the amount of atomization will decrease. At this time, you can replace the new atomizer. Please contact the local distributor or the company to buy the atomizer and the matching tool keys. The replacement method can be referred to (Fig. 1). The replacement steps are as follows:

First, cut off the power supply, remove the atomizer from the water and put it down for a while. After the water in the nebulizer is flowing out, dry the spray chamber and the water inside the atomizer.

(2) Turn the pressure ring counterclockwise with the tool key, remove the old energy changer, and keep the cavity of the atomized energy changer dry and clean.

(3) Install the new energy changer upward and backward and tighten the pressing ring clockwise.